Screenos Dailup VPN Xauth User Debug

From Network Security Wiki
Jump to navigation Jump to search


debug ike detail

SSG-1-> get db str
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 578, action 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 550 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 550 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 550, nxp 1[SA], exch 4[AG], flag 00 
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv : [SA] [KE] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID] 
## 2014-12-11 17:41:01 : [VID] [VID] [VID] [VID] [VID] [VID] [VID] 
## 2014-12-11 17:41:01 : valid id checking, id type:FQDN, len:22.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >     Validate (522): SA/128 KE/100 NONCE/44 ID/22 VID/12 VID/12 VID/20 VID/20 VID/20 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Receive Id in AG mode, id-type=2, id=test@wipro.com, idlen = 14
## 2014-12-11 17:41:01 :   locate peer entry for (2/test@wipro.com), by identity.
## 2014-12-11 17:41:01 :   Found identity<test@wipro.com> in group <2> user id <4>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Found peer entry (Dialup-VPNGW) from 192.168.3.1.
## 2014-12-11 17:41:01 : responder create sa: 192.168.3.1->192.168.1.1
## 2014-12-11 17:41:01 : init p1sa, pidt = 0x0
## 2014-12-11 17:41:01 : change peer identity for p1 sa, pidt = 0x0
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   peer_identity_create_with_uid: uid<0>
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   create peer identity 0x2a7a044
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   peer_identity_add_to_peer: num entry before add <2>
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   peer_identity_add_to_peer: num entry after add <3>
## 2014-12-11 17:41:01 : peer identity 2a7a044 created.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   EDIPI disabled
## 2014-12-11 17:41:01 : IKE<192.168.3.1> getProfileFromP1Proposal->
## 2014-12-11 17:41:01 : IKE<192.168.3.1> find profile[0]=<00000001 00000001 00000001 00000001> for p1 proposal (id 0), xauth(1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> responder create sa: 192.168.3.1->192.168.1.1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 1: Responder starts AGGRESSIVE mode negotiations.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> AG in state OAK_AG_NOSTATE.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : da 8e 93 78 80 01 00 00 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> receive unknown vendor ID payload
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 09 00 26 89 df d6 b7 12 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv XAUTH v6.0 vid
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 7d 94 19 a6 53 10 ca 6f  2c 17 9d 92 15 52 9d 56
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 90 cb 80 91 3e bb 69 6e  08 63 81 b5 ec 42 7b 1f
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv NAT-Traversal VID payload (draft-ietf-ipsec-nat-t-ike-02).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 44 85 15 2d 18 b6 bb cd  0b e8 a8 46 95 79 dd cc
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv NAT-Traversal VID payload (draft-ietf-ipsec-nat-t-ike-00).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 4a 13 1c 81 07 03 58 45  5c 57 28 f2 0e 95 45 2f
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : af ca d7 13 68 a1 f1 c9  6b 86 96 fc 77 57 01 00
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 97 87 98 c6 28 e5 82 a8  3b 2a 97 bf 0d 6e 60 dd
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : cb e7 94 44 a0 87 0d e4  22 4a 2c 15 1f bf e0 99
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : c6 1b ac a1 f1 a6 0c c1  08 00 00 00 00 00 00 00
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 40 48 b7 d5 6e bc e8 85  25 e7 de 7f 00 d6 c2 d3
## 2014-12-11 17:41:01 : c0 00 00 00 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> receive unknown vendor ID payload
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [VID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1    >   Vendor ID:
## 2014-12-11 17:41:01 : 12 f5 f2 8c 45 71 68 a9  70 2d 9f e2 74 cc 01 00
## 2014-12-11 17:41:01 : IKE<192.168.3.1> rcv non-NAT-Traversal VID payload.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [SA]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proposal received: xauthflag 0 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> P1 attributes not supported.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> [0] expect: xauthflag 3 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> auth(1)<PRESHRD>, encr(1)<DES>, hash(1)<MD5>, group(1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth attribute: responder
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proposal received: xauthflag 1 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> auth(1)<PRESHRD>, encr(1)<DES>, hash(1)<MD5>, group(1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth attribute: initiator
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 1 proposal [0] selected.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> SA Life Type = seconds
## 2014-12-11 17:41:01 : IKE<192.168.3.1> SA lifetime (TLV) = 86400
## 2014-12-11 17:41:01 : IKE<192.168.3.1> DH_BG_consume OK. p1 resp
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [KE]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing ISA_KE in phase 1.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase1: his_DH_pub_len is 96
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [NONCE]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing NONCE in phase 1.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [ID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ID received: type=ID_FQDN, FQDN = test@wipro.com, port=0, protocol=0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> process_id need to update peer entry, cur <Dialup-VPNGW>.
## 2014-12-11 17:41:01 :   locate peer entry for (2/test@wipro.com), by identity.
## 2014-12-11 17:41:01 :   Found identity<test@wipro.com> in group <2> user id <4>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Dynamic peer IP addr, search peer by identity.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> peer gateway entry has no peer id configured
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ID processed. return 0. sa->p1_state = 0.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 1 AG Responder constructing 2nd message.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct ISAKMP header.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Msg header built (next payload #1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [SA] for ISAKMP
## 2014-12-11 17:41:01 : IKE<192.168.3.1> auth(1)<PRESHRD>, encr(1)<DES>, hash(1)<MD5>, group(1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth attribute: disabled
## 2014-12-11 17:41:01 : IKE<192.168.3.1> lifetime/lifesize (86400/0)
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   set_phase1_transform, dh_group(1).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct NetScreen [VID]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct custom [VID]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct custom [VID]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct custom [VID]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [KE] for ISAKMP
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [NONCE]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> gen_skeyid()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> gen_skeyid: returning 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [ID] for ISAKMP
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [HASH]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ID, len=8, type=1, pro=17, port=500,
## 2014-12-11 17:41:01 : IKE<192.168.3.1> addr=192.168.1.1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct NAT-T [VID]: draft 2
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder psk ag mode: natt vid constructed.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> responder (psk) constructing remote NAT-D
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [NATD]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> responder (psk) constructing local NAT-D
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [NATD]
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Xmit : [SA] [VID] [VID] [VID] [VID] [KE] [NONCE] [ID] [HASH] 
## 2014-12-11 17:41:01 : [VID] [NATD] [NATD] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder sending IPv4 IP 192.168.3.1/port 10952
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Send Phase 1 packet (len=400)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<5/91180f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 144, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 116 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 116 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 116, nxp 8[HASH], exch 4[AG], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 88)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] [NATD] [NATD] [NOTIF] 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   extract payload (88): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> AG in state OAK_AG_INIT_EXCH.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [NATD]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [NATD]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [HASH]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ID, len=18, type=2, pro=0, port=0,
## 2014-12-11 17:41:01 : IKE<192.168.3.1> 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [NOTIF]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Received notify message for DOI <1> <24578> <INITIAL-CONTACT>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Received initial contact notification and removed Phase 2 SAs.
## 2014-12-11 17:41:01 : clear phase 2 sa of peer Dialup-VPNGW.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> process notify exit with <0>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> completing Phase 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> sa_pidt = 2a7a044
## 2014-12-11 17:41:01 : IKE<192.168.3.1> adjusting phase 1 hash
## 2014-12-11 17:41:01 : IKE<192.168.3.1> found existing peer identity 2a79d90
## 2014-12-11 17:41:01 : IKE<192.168.3.1> peer_identity_unregister_p1_sa.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   delete peer identity 0x2a7a044
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   peer_identity_remove_from_peer: num entry before remove <3>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> peer_idt.c peer_identity_unregister_p1_sa 686: pidt deleted.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> clear p1sa(0x2a4ba44) xauth because new p1sa (0x2a4ccd4) gets initial-contact
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE Xauth: release prefix route, ret=<-2>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> phase 1 sa timeout value reduced <28627> to <30>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 1: Completed for ip <192.168.3.1>, user<test@wipro.com>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 1: Completed Aggressive mode negotiation with a <28800>-second lifetime.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth is started: server, p1responder, aggr mode.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> start_xauth()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> start_xauth(): as:0 ac:-1 enable:1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: accounting server id 0 (use auth server as acct server).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: xauthstatus 20.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16520, val 0 added, len 0.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16521, val empty string, type <16521> added, len 0.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16522, val empty string, type <16522> added, len 0.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Create conn entry...
## 2014-12-11 17:41:01 : IKE<192.168.3.1>   ...done(new 0fe1c988)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct ISAKMP header.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Msg header built (next payload #8)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [HASH]
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 20, type 1, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   basic attr type 16520, valint 0
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 16521, vallen 0, valstr empty string, type <16521>
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 16522, vallen 0, valstr empty string, type <16522>
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<192.168.3.1> construct QM HASH
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Xmit*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Encrypt P2 payload (len 68)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder sending IPv4 IP 192.168.3.1/port 10952
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Send Phase 2 packet (len=76)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg packet sent. msgid fe1c988, len: 68, peer<192.168.3.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth status updated by state machine: 20
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   proc_other_session_notify->
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >     process Notify Payload: doi(1), msg(24578), txt<INITIAL-CONTACT>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Received initial contact notification and removed Phase 1 SAs.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 112, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 84 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 84 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 84, nxp 8[HASH], exch 6[XACT_EXCH], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 56)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [IKECFG]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing IKECFG payload. msgid fe1c988, msgtype 2, payload ID 47626
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 31, type 2, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   basic attr type 16520, valint 0
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 16521, vallen 4, valstr ama                 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 16522, vallen 7, valstr test12              
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16520, val 0 added, len 0.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16521, val ama added, len 4.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16522, val test12 added, len 7.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth server got type: 16520 v<0>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth server got var type: 16521
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth server got var type: 16522
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth server entering state machine: 20
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: accounting server id 0 (use auth server as acct server).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: xauthstatus 20.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_auth_pap: authing locally: uname aman, passwd test123          SUCCESS
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Get config for client(local auth)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg_assign_client_cfg(): Sa->ip_addr = 0x0 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> getting xauth local user <aman> remote setting
## 2014-12-11 17:41:01 : IKE<192.168.3.1> getting xauth local user IP from pool <Pool1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Don't do xauth RADIUS accounting. Send cfg to client directly.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg_send_client_cfg: ip 10.1.1.20, v4mask 255.255.255.255 dns1 0.0.0.0, dns2 0.0.0.0, win1 0.0.0.0, win2 0.0.0.0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg_send_client_cfg v6: id ::, prefix ::/0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg_send_client_cfg v6: dns1 ::, dns2 ::, win1 ::, win2 ::
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 1, val 10.1.1.20 added, len 4.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 2, val 255.255.255.255 added, len 4.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Create conn entry...
## 2014-12-11 17:41:01 : IKE<192.168.3.1>   ...done(new 93c31173)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct ISAKMP header.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Msg header built (next payload #8)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [HASH]
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 24, type 3, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 1, vallen 4, valstr 10.1.1.20           
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 2, vallen 4, valstr 255.255.255.255     
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<192.168.3.1> construct QM HASH
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Xmit*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Encrypt P2 payload (len 72)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder sending IPv4 IP 192.168.3.1/port 10952
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Send Phase 2 packet (len=76)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg packet sent. msgid 93c31173, len: 72, peer<192.168.3.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth status updated by state machine: 90
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 96, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 68 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 68 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 68, nxp 8[HASH], exch 6[XACT_EXCH], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 40)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [IKECFG]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing IKECFG payload. msgid 93c31173, msgtype 4, payload ID 47626
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 16, type 4, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 1, vallen 0, valstr 0.2.0.0             
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 2, vallen 0, valstr 0.0.0.0             
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 1, val 0.0.0.0 added, len 0.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 2, val 0.0.0.0 added, len 0.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth server entering state machine: 90
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: accounting server id 0 (use auth server as acct server).
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_process_server: xauthstatus 90.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ikecfg list add attr type 16527, val 1 added, len 0.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Create conn entry...
## 2014-12-11 17:41:01 : IKE<192.168.3.1>   ...done(new 0647f2bc)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct ISAKMP header.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Msg header built (next payload #8)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [HASH]
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 12, type 3, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   basic attr type 16527, valint 1
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<192.168.3.1> construct QM HASH
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Xmit*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Encrypt P2 payload (len 60)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder sending IPv4 IP 192.168.3.1/port 10952
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Send Phase 2 packet (len=68)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikecfg packet sent. msgid 647f2bc, len: 60, peer<192.168.3.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth status updated by state machine: 100
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_passed()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth login PASSED. gw <Dialup-VPNGW>, username <aman>, retry: 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_cleanup()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 88, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 200, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 60 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 60 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 60, nxp 8[HASH], exch 6[XACT_EXCH], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 32)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] [IKECFG] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [IKECFG]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing IKECFG payload. msgid 647f2bc, msgtype 4, payload ID 47626
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   print ikecfg attribute payload:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   next: 0, payloadlength 12, type 4, identifier 47626.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   variable attr type 16527, vallen 0, valstr                     
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth: bad state negt<00000000> peer<00000000>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 172 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 172 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 172, nxp 8[HASH], exch 32[QM], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Create conn entry...
## 2014-12-11 17:41:01 : IKE<192.168.3.1>   ...done(new 1956a75f)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 2 msg-id <1956a75f>: Responded to the first peer message from user <test@wipro.com>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 144)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] [SA] [NONCE] [ID] [ID] 
## 2014-12-11 17:41:01 : valid id checking, id type:IP Address, len:12.
## 2014-12-11 17:41:01 : valid id checking, id type:IP Subnet, len:16.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   extract payload (144): 
## 2014-12-11 17:41:01 : valid id checking, id type:IP Address, len:12.
## 2014-12-11 17:41:01 : valid id checking, id type:IP Subnet, len:16.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> QM in state OAK_QM_SA_ACCEPT.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> receive init proxy id type ID_IPV4_ADDR with mask 0: force mask to all 1.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Start by finding matching member SA (verify -1/-1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE: Matching policy: gw ip <192.168.3.1> peer entry id<1>
## 2014-12-11 17:41:01 : id hash:
## 2014-12-11 17:41:01 : 3a c5 8a 23 13 24 e2 5f  7d 94 e3 42 a0 b4 33 35
## 2014-12-11 17:41:01 : 93 8e 57 1b 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   protocol matched expected<0>.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   port matched expect l:<0>, r<0>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Peer is dial up.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> configured ID for sa(32769): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> local  10.1.1.0/24 prot<0> port<0> type<4>        remote 10.1.1.20/32 prot<0> port<0> type<1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> member without dynamic policy found, match local address only
## 2014-12-11 17:41:01 : ipvx = IPV4
## 2014-12-11 17:41:01 : rcv_local_addr = 10.1.1.0, rcv_local_mask = 255.255.255.0, p_rcv_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : rcv_remote_addr = 10.1.1.20, rcv_remote_mask = 255.255.255.255, p_rcv_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : ike_p2_id->local_ip = 10.1.1.0, cfg_local_mask = 255.255.255.0, p_cfg_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : ike_p2_id->remote_ip = 10.1.1.20, cfg_remote_mask = 255.255.255.255, p_cfg_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proxy ID match: Located matching Phase 2 SA <32769>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Start by finding matching member SA (verify -1/-1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE: Matching policy: gw ip <192.168.3.1> peer entry id<1>
## 2014-12-11 17:41:01 : id hash:
## 2014-12-11 17:41:01 : 3a c5 8a 23 13 24 e2 5f  7d 94 e3 42 a0 b4 33 35
## 2014-12-11 17:41:01 : 93 8e 57 1b 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   protocol matched expected<0>.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   port matched expect l:<0>, r<0>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Peer is dial up.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> configured ID for sa(32769): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> local  10.1.1.0/24 prot<0> port<0> type<4>        remote 10.1.1.20/32 prot<0> port<0> type<1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> member without dynamic policy found, match local address only
## 2014-12-11 17:41:01 : ipvx = IPV4
## 2014-12-11 17:41:01 : rcv_local_addr = 10.1.1.0, rcv_local_mask = 255.255.255.0, p_rcv_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : rcv_remote_addr = 10.1.1.20, rcv_remote_mask = 255.255.255.255, p_rcv_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : ike_p2_id->local_ip = 10.1.1.0, cfg_local_mask = 255.255.255.0, p_cfg_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : ike_p2_id->remote_ip = 10.1.1.20, cfg_remote_mask = 255.255.255.255, p_cfg_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proxy ID match: Located matching Phase 2 SA <32769>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [SA]:
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   Check P2 Proposal
## 2014-12-11 17:41:01 : IKE<192.168.3.1> SA life type = seconds
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   SA life duration (TV) = 28800
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   encap mode from peer = 1.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   encap mode after converting it to private value = 1.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 2 received:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> atts<00000003 00000000 00000002 00000001 00000001 00000000>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> proto(3)<ESP>, esp(2)<ESP_DES>, auth(1)<MD5>, encap(1)<TUNNEL>, group(0)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> P2 proposal [0] selected.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   add sa list for msg id <1956a75f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> get_unique_spi 0, 1314921955, 4e601de3
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [NONCE]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> processing NONCE in phase 2.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [ID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Process [ID]:
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 2 Responder constructing 2nd message.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct ISAKMP header.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Msg header built (next payload #8)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [HASH]
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [SA] for IPSEC
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   Set IPSEC SA attrs tunnel(1) MD5 grp0 lifetime(28800/0)
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   Before NAT-T attr unmap: P2 prop tunnel = 1.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   After NAT-T attr unmap: P2 prop tunnel = 1.
## 2014-12-11 17:41:01 : IKE<10.1.1.20> IP<10.1.1.20> mask<255.255.255.255> prot<0> port<0>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Initiator P2 ID built: ...h
## 2014-12-11 17:41:01 : IKE<10.1.1.0> IP<10.1.1.0> mask<255.255.255.0> prot<0> port<0>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder P2 ID built: ...h
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [NONCE] for IPSec
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [ID] for Phase 2
## 2014-12-11 17:41:01 : id payload constructed. type(1),ip(10.1.1.20),mask(255.255.255.255), prot(0), port(0)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [ID] for Phase 2
## 2014-12-11 17:41:01 : id payload constructed. type(4),ip(10.1.1.0),mask(255.255.255.0), prot(0), port(0)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> send out RESPONDER_LIFETIME notification. prot=3, 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> life_sec=3600 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Construct [NOTIF] (RESPONDER-LIFETIME) for IPSEC
## 2014-12-11 17:41:01 : IKE<192.168.3.1> construct QM HASH
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Xmit*: [HASH] [SA] [NONCE] [ID] [ID] [NOTIF] 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Encrypt P2 payload (len 192)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Responder sending IPv4 IP 192.168.3.1/port 10952
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Send Phase 2 packet (len=196)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> oakley_process_quick_mode():exit
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ike packet, len 80, action 0
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: received 52 bytes from socket.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ****** Recv packet if <ethernet0/3> of vsys <Root> ******
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Catcher: get 52 bytes. src port 10952
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   ISAKMP msg: len 52, nxp 8[HASH], exch 32[QM], flag 01  E 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Decrypting payload (length 24)
## 2014-12-11 17:41:01 : IKE<192.168.3.1    > Recv*: [HASH] 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   extract payload (24): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> QM in state OAK_QM_AUTH_AWAIT.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> xauth_cleanup()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Done cleaning up IKE Phase 1 SA
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Start by finding matching member SA (verify 1/1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Verify sa: index 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE: Matching policy: gw ip <192.168.3.1> peer entry id<1>
## 2014-12-11 17:41:01 : id hash:
## 2014-12-11 17:41:01 : 3a c5 8a 23 13 24 e2 5f  7d 94 e3 42 a0 b4 33 35
## 2014-12-11 17:41:01 : 93 8e 57 1b 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   protocol matched expected<0>.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   port matched expect l:<0>, r<0>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Peer is dial up.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> configured ID for sa(32769): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> local  10.1.1.0/24 prot<0> port<0> type<4>        remote 10.1.1.20/32 prot<0> port<0> type<1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> member without dynamic policy found, match local address only
## 2014-12-11 17:41:01 : ipvx = IPV4
## 2014-12-11 17:41:01 : rcv_local_addr = 10.1.1.0, rcv_local_mask = 255.255.255.0, p_rcv_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : rcv_remote_addr = 10.1.1.20, rcv_remote_mask = 255.255.255.255, p_rcv_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : ike_p2_id->local_ip = 10.1.1.0, cfg_local_mask = 255.255.255.0, p_cfg_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : ike_p2_id->remote_ip = 10.1.1.20, cfg_remote_mask = 255.255.255.255, p_cfg_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proxy ID match: Located matching Phase 2 SA <32769>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> sa ID for phase 2 sa is <32769>. IP version is 4.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Search existing member entry user_id<4> dial_id<2>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Start by finding matching member SA (verify -1/1)
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Verify sa: index 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE: Matching policy: gw ip <192.168.3.1> peer entry id<1>
## 2014-12-11 17:41:01 : id hash:
## 2014-12-11 17:41:01 : 3a c5 8a 23 13 24 e2 5f  7d 94 e3 42 a0 b4 33 35
## 2014-12-11 17:41:01 : 93 8e 57 1b 
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   protocol matched expected<0>.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   port matched expect l:<0>, r<0>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Peer is dial up.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> configured ID for sa(32769): 
## 2014-12-11 17:41:01 : IKE<192.168.3.1> local  10.1.1.0/24 prot<0> port<0> type<4>        remote 10.1.1.20/32 prot<0> port<0> type<1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> member without dynamic policy found, match local address only
## 2014-12-11 17:41:01 : ipvx = IPV4
## 2014-12-11 17:41:01 : rcv_local_addr = 10.1.1.0, rcv_local_mask = 255.255.255.0, p_rcv_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : rcv_remote_addr = 10.1.1.20, rcv_remote_mask = 255.255.255.255, p_rcv_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : ike_p2_id->local_ip = 10.1.1.0, cfg_local_mask = 255.255.255.0, p_cfg_local_real = 10.1.1.0
## 2014-12-11 17:41:01 : ike_p2_id->remote_ip = 10.1.1.20, cfg_remote_mask = 255.255.255.255, p_cfg_remote_real = 10.1.1.20
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Proxy ID match: Located matching Phase 2 SA <32769>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Found earlier sa for this group member, idx<1> id<32769>.
## 2014-12-11 17:41:01 : ikmpd.c 3871. pidt == 2a79d90
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   life (sec or kb): lcl 3600, peer 28800, set 3600.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   life (sec or kb): lcl 0, peer 0, set 0.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> gen_qm_key()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> load_sa_keys(): enter.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> gen_qm_key()
## 2014-12-11 17:41:01 : IKE<192.168.3.1> load_sa_keys(): enter.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> ikmpd.c 3999. sa ID for phase 2 sa is <32769>. IP version is 4.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   spi hash node removed: type<2>,spi<4e601de2>,ip<192.168.1.1>
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   spi hash node removed: type<2>,spi<5cf8173e>,ip<192.168.3.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> clean_all_sa_state_node_from_list->
## 2014-12-11 17:41:01 : IKE<192.168.3.1> relocate earlier SA-state.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   insert_sa_state_to_spi_hash spi<4e601de2>, sa_index<1>, Incoming
## 2014-12-11 17:41:01 : IKE<192.168.3.1> key_modify: sa index <1> bk_idx <1>.
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   insert_sa_state_to_spi_hash spi<4e601de3>, sa_index<1>, Incoming
## 2014-12-11 17:41:01 : IKE<0.0.0.0        >   insert_sa_state_to_spi_hash spi<f9e0d84d>, sa_index<1>, Outgoing
## 2014-12-11 17:41:01 : IKE<192.168.3.1> update acvpn flags for sa 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> update acvpn flags for sa 1 - 0x400433
## 2014-12-11 17:41:01 : IKE<192.168.3.1>  crypto_ctx 11, 8, 8, 8, 0, 0, 16, 0, 12, 48
## 2014-12-11 17:41:01 : IKE<192.168.3.1> modify esp tunnel: src (peer) ipv4 <192.168.3.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> modifying esp tunnel: self <ipv4 192.168.1.1>
## 2014-12-11 17:41:01 : IKE<192.168.3.1> update auto NHTB status for sa 1
## 2014-12-11 17:41:01 : IKE<192.168.3.1> after mod, out nsptunnel <03661530>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 2 msg-id <1956a75f>: Completed for user<test@wipro.com>.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Phase 2 msg-id <1956a75f>: Completed Quick Mode negotiation with SPI <4e601de3>, tunnel ID <32769>, and lifetime <3600> seconds/<0> KB.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> Application sa installed.
## 2014-12-11 17:41:01 : IKE<192.168.3.1> oakley_process_quick_mode():exit
## 2014-12-11 17:41:01 : IKE<192.168.3.1> IKE msg done: PKI state<0> IKE state<6/1097182f>


get config

SSG-1-> get config
set interface ethernet0/1.1 ip 10.1.1.1/24
set interface ethernet0/1.1 nat
set interface ethernet0/3 ip 192.168.1.1/24
set interface ethernet0/3 route
set ippool "Pool1" 10.1.1.20 10.1.1.25
set user "aman" uid 5
set user "aman" type xauth
set user "aman" remote ippool "Pool1"
set user "aman" password "FiPEI1D7NcekQBsDb7CqIHSrx3nyVccZKg=="
set user "aman" "enable"
set user "ike-usr" uid 4
set user "ike-usr" ike-id fqdn "test@wipro.com" share-limit 10
set user "ike-usr" type ike
set user "ike-usr" "enable"
set user-group "ike-grp" id 2
set user-group "ike-grp" user "ike-usr"
set crypto-policy
set ike gateway "Dialup-VPNGW" dialup "ike-grp" Aggr outgoing-interface "ethernet0/3" preshare "Tvh0IpHtNk8w1AsnRUCWBK1GHknZF/BSwA==" proposal "pre-g1-des-md5"
set ike gateway "Dialup-VPNGW" nat-traversal keepalive-frequency 5
set ike gateway "Dialup-VPNGW" xauth server "Local"
set xauth default ippool "Pool1"
set vpn "Dialup-PH2" gateway "Dialup-VPNGW" no-replay tunnel idletime 0 proposal "nopfs-esp-des-md5" 
set vpn "Dialup-PH2" proxy-id local-addr "Trust" "10.1.1.0/24" remote-addr "Untrust" "Dial-Up VPN IPv4" "ANY" 
set policy id 5 from "Untrust" to "Trust"  "Dial-Up VPN IPv4" "10.1.1.0/24" "ANY" tunnel vpn "Dialup-PH2" id 0x4 log 


get ike cookie

SSG-1-> get ike cookie

IKEv1 SA -- Active: 1, Dead: 0, Total 1

1097182f/0006, 192.168.3.1:10952->192.168.1.1:500, PRESHR/grp1/DES/MD5, xchg(5) (Dialup-VPNGW/grp2/usr4)
resent-tmr 322 lifetime 28800 lt-recv 86400 nxt_rekey 28658 cert-expire 0
responder, err cnt 0, send dir 1, cond 0xc0
nat-traversal map not available
ike heartbeat              : disabled
ike heartbeat last rcv time: 0
ike heartbeat last snd time: 0
XAUTH status: 100
DPD seq local 0, peer 353093532


IKEv2 SA -- Active: 0, Dead: 0, Total 0


get sa

SSG-1-> get sa
total configured sa: 1
HEX ID    Gateway         Port Algorithm     SPI      Life:sec kb Sta   PID vsys
00008001<     192.168.3.1  500 esp: des/md5  4e601de4  3453 unlim A/-     5 0
00008001>     192.168.3.1  500 esp: des/md5  f21ba3d7  3453 unlim A/-    -1 0


get sa id

SSG-1-> get sa id 0x8001
index 1, name Dialup-PH2, peer gateway ip 192.168.3.1. vsys<Root>
auto key. policy node, tunnel mode, policy id in:<5> out:<-1>
id hash: >3a>c5>8a>23>13>24>e2>5f>7d>94>e3>42>a0>b4>33>35>93>8e>57>1b
 vpngrp:<-1>. sa_list_nxt:<4>. parent_sa_id:<4>.
tunnel id 32769, peer id 1, NSRP Local.     dialup, dynamic member.   site-to-site. Local interface is ethernet0/3 <192.168.1.1>.
  esp, group 0,  des encryption, md5  authentication
  autokey, IN active, OUT active
  monitor<0>, latency: 0, availability: 0
  DF bit: clear
  app_sa_flags: 0x2400433
  proxy id: local 10.1.1.0/255.255.255.0, remote 10.1.1.20/255.255.255.255, proto 0, port 0/0
  ike activity timestamp: 95033667
  DSCP-mark : disabled
nat-traversal map not available
incoming: SPI 4e601de4, flag 00004000, tunnel info 40008001, pipeline
  life 3600 sec, 3444 remain, 0 kb, 0 bytes remain
  anti-replay off, idle timeout value <0>, idled 123 seconds
  next pak sequence number: 0x0
  bytes/paks:480/8; sw bytes/paks:480/8
outgoing: SPI f21ba3d7, flag 00000000, tunnel info 40008001, pipeline
  life 3600 sec, 3444 remain, 0 kb, 0 bytes remain
  anti-replay off, idle timeout value <0>, idled 123 seconds
  next pak sequence number: 0x4
  bytes/paks:480/8; sw bytes/paks:480/8


get vpn

SSG-1-> get vpn
Name            Gateway         Mode RPlay 1st Proposal         Monitor Use Cnt Interface 
--------------- --------------- ---- ----- -------------------- ------- ------- ---------------
Dialup-PH2      Dialup-VPNGW    tunl No    nopfs-esp-des-md5    off           1 eth0/3
  Total Auto VPN: 1
  Total Pure Transport Mode IPSEC VPN: 0

Name       Gateway         Interface       Lcl SPI  Rmt SPI  Algorithm        Monitor Tunnel ID 
---------- --------------- --------------- -------- -------- ---------------- ------- ----------
Total Manual VPN 0


get xauth active

SSG-1-> get xauth active 

GW Name              Login           Auth By    GW IP           Private IP      Last Login     Session Timeout   Idle Timeout
Dialup-VPNGW            aman      Local     192.168.3.1       10.1.1.20 255.255.255.255  2014-12-11 17:49:05         0      0 


NCP-e Client Profile

[GENERAL]
Export=1
Product=NCP Secure Client - Juniper Edition
Version=9.32 Build 218
Date=12/11/2014 5:40:13 PM
[PROFILE1]
Name=dialup-ssg
NotKeepVpn=0
BootProfile=0
ConnMode=0
Timeout=1000
PkiConfig=
ExchMode=4
IKE-Policy=Pre-shared Key
IkeDhGroup=1
IkeLTSec=001:00:00:00
IPSec-Policy=proposal
PFS=0
IPSecLTType=1
IpsecLTSec=000:08:00:00
IPSecLTKb=50000
IkeIdType=2
IkeIdStr=test@wipro.com
Gateway=192.168.1.1
UseTunnel=0
UseXAUTH=1
DisDPD=0
DPDInterval=20
DPDRetrys=8
AntiReplay=0
IpAddrAssign=0
IPAddress=
SubnetMask=255.255.255.0
DNS1=0.0.0.0
DNS2=0.0.0.0
WINS1=0.0.0.0
WINS2=0.0.0.0
DomainName=
SubjectCert=
IssuerCert=
FingerPrint=
UseSHA1=0
DNSActiv=0
DNS1Tmp=0.0.0.0
DNS2Tmp=0.0.0.0
WINS1Tmp=0.0.0.0
WINS2Tmp=0.0.0.0
UsePreShKey=1
Network1=10.1.1.0
SubMask1=255.255.255.0
[IKEPOLICY1]
IkeName=Pre-shared Key
IkeCrypt=1
IkeHash=1
IkeAuth=1
IkeDhGroup=2
[IPSECPOLICY1]
IPSecName=proposal
IpsecCrypt=1
IpsecAuth=1





blog comments powered by Disqus